How to Replace a Kia Sportage Replacement Key
The key of a lot of Kia models has the keyless entry feature built in. The key is usually akin to a remote control and is able to be replaced with a fresh one from a Kia dealer or locksmith.
Key fobs may stop working due to various reasons, such as a dead coin battery worn buttons signals, signal interference, water damage and a damaged receiver module. Here are some helpful tips to assist you in getting your Kia sportage replacement key to work again.
How to replace a smartkey or remote key?
The battery inside your Kia's smart key will eventually have to be replaced, whether it is a remote key as well as a push-to start key or a standard metal key that is not equipped with transponder. This is especially relevant if your vehicle displays a message that indicates the remote or smart keys aren't powered.
G28 is a relatively easy process. To replace the battery on the keyfob remove your mechanical key from the slot at the back of the fob. Then, pry the cover open. A small screw is found inside the key fob, which holds the battery in its place. Take out the old battery by removing the screw with a small screwdriver. Install the new battery and close the gap on the key fob.
Test the key fob by pressing the lock or unlock buttons. If the doors lock and unlock according to your expectations, then you're in good shape! You can now use the hands-free feature to lock and unlock your Kia when your fingers get cold or you have to run errands around Brandon.
Note: Certain key fobs could need to be programmed (transponder chips or smart keys). This requires a computer which is available to the locksmith who works for the automotive dealer. Other keys (non transponder metal keys) don't require programming. If your key has to be reprogrammed, you must be aware of the key code number printed on the tag of the key code and then record the number in a secure place.
How do I replace a battery
If your Kia key fob isn't responding to pressing the lock or unlock button on the fob, this is a signal that the battery should be replaced. A low battery could cause other issues, such as the check engine light coming on or delayed cranking of the engine. It is relatively easy to replace the key fob battery with just the use of a few tools.
Make sure that you shut off your vehicle and shut all doors before you begin. Find the small, metal or plastic piece near the bottom of the key fob. Then, jiggle it until the key falls out. This key can be put into the door's driver handle to unlock your car.
To replace the key fob battery, take off the cover at the rear and use a pry bar tool to loosen the latch that holds the black negative battery cable. Remove the old battery and orient the new one in a way that the "+" positive side is facing you and the "negative" negative side is facing the fob's electrical contacts made of metal. Push the new CR2032 battery straight into place, avoiding excessive force to avoid bending or damaging the contacts on the metal.
After installing the new battery then turn the key fob off and on in the ignition until the door locks cycle. You can then test your Kia's keys fob once more to ensure it's working properly.
How can you replace the smart key?
There is a possibility of having an ordinary keyfob or Smart Key depending on the model of Kia Sportage. The smart key is equipped with an embedded mechanical key blade while the standard keyfob does not. Both key fobs are equipped with an internal battery that will eventually require replacing. Fortunately, this is an easy process that will take about two minutes.
Make sure you turn off your Kia and stand on a flat or well-lit surface prior to when you begin. Be aware that there are tiny components inside the fob that could be removed if not vigilant.
The first step is to find the small release button that is located on the lower backside of your fob. It could be an oval or circular slot. When you press it mechanical key blade, it will appear and you will be able to open the key fob.
Once you have the key fob open then you can remove the old battery, and replace it. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. After you've finished, your key fob will allow you to lock, unlock, and start your vehicle, even if it isn't running.
How do I replace a mechanical key
The Kia keyfob is an excellent convenience that lets us lock or unlock our car with just pressing the button. But like any device there are issues with it at times. There are ways to solve these issues and keep our key fobs in good working condition for the long term.
One of the most common issues is a low or dead battery. This can cause your fob to stop working or work intermittently. If this happens you should replace the battery with a fresh new one.
If this does not resolve the problem, use the flathead screwdriver that is standard to wedge the plastic casing of the fob open. Be careful not to damage any internal components or scratch the plastic. After the battery has been removed then replace it with a new one.
Close and open the door using the mechanical key. (Every Kia fob comes with a spare mechanical key which will fit into the slot). Test the fob to make sure it's working properly. Contact a dealer or locksmith to address the issue if the fob is still not working. To avoid lockouts in the future, ensure you purchase an emergency key that can be able to work with all door and trunk cylinders.